SCG Design Solutions
  • Twitter
  • Linkedin
  • Facebook
  • Home
  • Projects
  • Services
  • Firm
  • Contact
  • Menu
All 16 /Small Residential 3 /Custom Homes 4 /Multi-Family 3 /Mix-Use Facility 3 /Retail 2 /Healthcare 1

Small Home

This project was a small addition at the rear of the existing home. The owners needed more living space, which included an enlarged kitchen and a master bedroom suite on second floor with a small exterior balcony. The SCG scope of work included providing complete structural engineering design and drawings for this project.
Client : AG Architects

Traditional Home

This home started out as a contemporary style and the owner was seeking a more traditional look to be more in keeping with his neighborhood. We gave the whole exterior a new look and opened up some walls on the interior. The SCG scope of work included providing complete structural engineering design and drawings for this project.
Client : AG Architects

Speculative Home

A speculative home, new construction in a prominent area of New Jersey. This home features over 6,000 square feet of grand open spaces with each room flowing into the next. The SCG scope of work included providing complete structural engineering design and drawings for this project.
Client : AG Architects

Custom Home

(Construction in progress)
This is approximately 10,000 square feet custom home under construction. It is two story structure that features a grand entry porch, Open to above foyer, second floor terrace, a detached four car garage, swimming pool. The scope of work was structural design and drawings in Revit. The project also features multiple masonry retaining walls.

Private Custom Home

A new home with traditional contemporary style. This home of approximately 5,000 square feet area features 5 bedrooms, conservatory, morning room, sunroom, rear deck, front porch and 2-car garage. This is all wood construction with I joist floor framing, pre-manufactured wood roof trusses and wood stud walls. The lateral system consists of wood shear walls and a steel moment frame at the rear.

Custom Home (Three Story)

This is recently built project that consists of three contemporary styled custom homes. These are three story structures with two car front entry garage, rear patio, a third floor deck.

Private Custom Home

A new high-end custom home of approximately 6,000 square foot building area. This is a two-story home with habitable attic and partial basement. This home features a three-car garage, a breezeway, a series of retaining walls, and a screened porch. It is wood construction with stick built roof and manufactured joists for floors. The lateral load resisting system comprise of wood shear walls. SCG scope included structural design for gravity loading, wind and seismic loading.

Multi-Family (Three Story)

(Construction in progress)
This is 30,000 square feet three story apartment over first floor parking that is under construction. The structural system consists of concrete slab on metal deck at second level and wood framing above. The lateral system at front is moment frames and wooden shearwall system elsewhere.

Historic Building

(Construction in progress)
Repurposing of a deteriorated 32,000 sf historic building in Pennsylvania. SCG scope included structural design of building repairs, renovations and additions. A new three story steel framed addition with porte-cochere and elevator to provide an accessible entrance to building

Multi-Family Public Housing

(Construction in progress)
Multi-family public housing in Pennsylvania. SCG scope included structural design of foundations and gravity and lateral analysis of wood framed structures. The project has a total of 145 units in 13 separate three story buildings with 6 to 45 units.

Retail and Shopping Outlet

This is approximately 12000 square feet three story commercial, Retail and Office building featuring brick façade, store fronts and canopies. The roof consist of metal deck roofing on steel open web joists and the floor consist of concrete slab on metal deck supported on steel open web joists. The exterior and interior wall construction is metal non load bearing studs. The gravity loading system consist of steel beams and steel columns whereas the lateral system consist of steel moment frames.

Retail Space

This is a single story mixed use building with approximately 4000 square feet building footprint. The SCG scope of work included structural design for Gravity and Wind / Seismic loading. The gravity system consist of metal roof with steel bar joists supported on light gage metal stud wall at periphery and steel beams & columns at one interior line. The lateral load resisting system comprised of metal X bracing system. The building also featured a 6 ft tall parapet all around framed with light gage studs supported on kickers behind.

New Commercial, Retail and Office Building

This 6000 square feet commercial building features store fronts, metal canopies, flat roof with parapet all around. This is single story steel construction with metal deck roofing on steel open web joists. The gravity loading system consists of steel beams and steel columns with infill metal stud walls at periphery. The lateral system consists of steel moment frames.

Retail Space

This is a single story mixed use building with approximately 4000 square feet building footprint. The SCG scope of work included structural design for Gravity and Wind / Seismic loading. The gravity system consist of metal roof with steel bar joists supported on light gage metal stud wall at periphery and steel beams & columns at one interior line. The lateral load resisting system comprised of metal X bracing system. The building also featured a 6 ft tall parapet all around framed with light gage studs supported on kickers behind.

Retail and Shopping Outlet

This is approximately 12000 square feet three story commercial, Retail and Office building featuring brick façade, store fronts and canopies. The roof consist of metal deck roofing on steel open web joists and the floor consist of concrete slab on metal deck supported on steel open web joists. The exterior and interior wall construction is metal non load bearing studs. The gravity loading system consist of steel beams and steel columns whereas the lateral system consist of steel moment frames.

Dental Surgery Center

This is a 80 ft wide x 175 ft long single story dental surgery center featuring Procedure Rooms, OR, Drug room, Private recovery rooms, consult, reception and waiting area. The trademark of this building is the covered porch at front and on side. The building has brick veneer all around. The roof construction is Vulcraft metal decking on 18” deep steel joists. The joists support on steel beams and columns at periphery and at interior. The wall consists of metal studs that bypass the steel beam at roof level to form a parapet. The foundation of the building is conventional and the floor is concrete slab on grade. The canopy which is higher than the main roof is steel framed supported on two columns at the front.
Client : Designed to Build Architects

Quick Links

  • Contact
  • Firm
  • Projects
  • Services
  • Sitemap

SCG DESIGN SOLUTIONS INC

8 The Green
Suite #8029
Dover, DE 19901

Phone:
(302)-401-6687 / (805)-624-6376

Client Affiliate Offices:
NJ, NY, MA, PA & CA

Contact

For project or qualifications inquiries, please email to:

sales@scgdesignsolutions.com

Copyright © 2018-2019 | All Rights Reserved. | Powered by Scrupulous Technologies Ltd.
  • Twitter
  • Linkedin
  • Facebook
  • Terms of Use
  • Privacy
Scroll to top